Chrysler
300 K Throttle Bushing Repair
James Douglas writes:
On the 300K throttle bracket bushing that likes to fall out,
to fix the problem I used some plastic to metal epoxy from the local hardware store. It is even the same
color as the loose fitting, as seen in the one photo, plastic bushing. I just
used a tapered drift to expand that bushing out and then let the epoxy dry.
I scraped to get the paper towel off when it was done.
If that bushing falls out (and it DOES) you are stuck. This way that will never happen. If
you ever need to change it you can just take a torch and burn the
epoxy and old bushing off and clean it and do it again.